3.13 Transferring results between Abaqus/Standard and Abaqus/Explicit

Abaqus Verification Guide

3.13 Transferring results between Abaqus/Standard and Abaqus/Explicit

“Transferring results between Abaqus/Explicit and Abaqus/Standard,” Section 3.13.1
“Transferring results from one Abaqus/Standard analysis to another Abaqus/Standard analysis,” Section 3.13.2
“Transferring results from one Abaqus/Explicit analysis to another Abaqus/Explicit analysis,” Section 3.13.3
“Transferring results with general beam sections,” Section 3.13.4
“Transferring results with general shell sections,” Section 3.13.5
“Adding and removing elements during results transfer,” Section 3.13.6
“Transferring rigid elements,” Section 3.13.7
“Transferring mass and rotary inertia elements,” Section 3.13.8
“Transferring connector elements into Abaqus/Explicit,” Section 3.13.9
“Transferring hourglass forces,” Section 3.13.10
“Changing the material definition during import,” Section 3.13.11
“Transferring results with plasticity,” Section 3.13.12
“Transferring results with damage,” Section 3.13.13
“Transferring results with hyperelasticity,” Section 3.13.14
“Transferring results with viscoelasticity,” Section 3.13.15
“Transferring results for a hyperelastic sheet with a circular hole,” Section 3.13.16
“Transferring results with hyperfoam,” Section 3.13.17
“Transferring results with orientation,” Section 3.13.18
“Miscellaneous results transfer tests,” Section 3.13.19
“Transferring results with parallel rheological framework,” Section 3.13.20
“Transferring results of an analysis model multiple times,” Section 3.13.21