Use the save tool 
in the Views toolbar to open the Save Views dialog box and save a user-defined view. The Save Views dialog box is illustrated in the following figure:
To save a user-defined view:
From the main menu bar, select View
Save.
Tip:
You can also save a view by clicking the tool in the Views toolbar.
If you have only one viewport, Abaqus/CAE immediately opens the Save View dialog box. If you have more than one viewport, click in the viewport whose view you want to save; Abaqus/CAE then opens the Save View dialog box.
From the Save View dialog box, choose the desired Scale & Position behavior:
Choose Auto-fit to save only the orientation of the view. When you apply a view saved with this option, the saved orientation is applied, but the scaling factor and position are adjusted to make the view fill the viewport.
Choose Save current to save the orientation, the zoom factor, and the position of the view. When you apply a view saved with this option, the saved orientation, scaling factor, and position are all applied.
In the View Name list in the Save Views dialog box, click the name of the tool you will use to recall this view.
If you overwrite one of the six custom views—front, back, top, bottom, left, right—the other five views still retain their original definitions; that is, they do not become rotated to positions orthogonal to your saved view.
From the Save View dialog box, click OK.
Abaqus/CAE saves the definition of the view you selected. The view is saved only for the duration of the current session; the saved view will not be available the next time you run Abaqus/CAE.
