A.1 Abaqus keyword browser table

Use the following table to determine which Abaqus/CAE module (or toolset) contains the functionality associated with a particular Abaqus keyword. To view documentation for the module (or toolset), click the module (or toolset) name shown in the table. Most currently unsupported keywords can be added to your model using the Keywords Editor; see “Adding unsupported keywords to your Abaqus/CAE model,” Section 9.10.1, for more information.

To see keywords beginning with a particular letter of the alphabet, click that letter in the table below.

Table A–1 Keyword browser table.

Keyword	Purpose	Module	Products
*ACOUSTIC CONTRIBUTION	Request the computation of the acoustic contribution factors for the linear, eigenmode-based, steady-state dynamic procedure.	Unsupported	Abaqus/Standard
*ACOUSTIC FLOW VELOCITY	Specify flow velocities as a predefined field for acoustic elements.	Unsupported	Abaqus/Standard
*ACOUSTIC MEDIUM	Specify an acoustic medium.	Property module	Abaqus/Standard Abaqus/Explicit
*ACOUSTIC WAVE FORMULATION	Specify the type of formulation in acoustic problems with incident wave loading.	Model attribute	Abaqus/Standard Abaqus/Explicit
*ADAPTIVE MESH	Define an adaptive mesh domain.	Supported in the Step module; only one adaptive mesh domain can be defined per step.	Abaqus/Standard Abaqus/Explicit
*ADAPTIVE MESH CONSTRAINT	Specify constraints on the motion of the mesh for an adaptive mesh domain.	Displacement and velocity adaptive mesh constraints are supported in the Step module.	Abaqus/Standard Abaqus/Explicit
*ADAPTIVE MESH CONTROLS	Specify controls for the adaptive meshing and advection algorithms.	Step module	Abaqus/Standard Abaqus/Explicit
*ADAPTIVE MESH REFINEMENT	Activate adaptive mesh refinement in an Eulerian domain.	Unsupported	Abaqus/Explicit
*ADJUST	Adjust user-specified nodal coordinates to lie on a given surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
*AMPLITUDE	Define an amplitude curve.	Amplitude toolset; bubble loading is not supported. Similar functionality is available in the Interaction module.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ANISOTROPIC HYPERELASTIC	Specify anisotropic hyperelastic properties for approximately incompressible materials.	Property module	Abaqus/Standard Abaqus/Explicit
*ANNEAL	Anneal the structure.	Step module	Abaqus/Explicit
*ANNEAL TEMPERATURE	Specify material properties for modeling annealing or melting.	Property module	Abaqus/Standard Abaqus/Explicit
*AQUA	Define fluid variables for use in loading immersed beam-type structures.	Unsupported	Abaqus/Aqua
*ASSEMBLY	Begin an assembly definition.	Assembly module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ASYMMETRIC-AXISYMMETRIC	Define areas of integration for contact elements used with CAXA n or SAXA n elements.	Unsupported	Abaqus/Standard
*AXIAL	Used to define the axial behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
*BASE MOTION	Define the base motion for linear, eigenmode-based, dynamic procedures.	Unsupported	Abaqus/Standard
*BASELINE CORRECTION	Include baseline correction.	Amplitude toolset	Abaqus/Standard
*BEAM ADDED INERTIA	Define additional beam inertia.	Unsupported	Abaqus/Standard Abaqus/Explicit
*BEAM FLUID INERTIA	Define additional beam inertia due to immersion in a fluid.	Property module	Abaqus/Standard Abaqus/Explicit
*BEAM GENERAL SECTION	Specify a beam section when numerical integration over the section is not required.	General beam sections with linear response are supported in the Property module.	Abaqus/Standard Abaqus/Explicit
*BEAM SECTION	Specify a beam section when numerical integration over the section is required.	Property module	Abaqus/Standard Abaqus/Explicit
*BEAM SECTION GENERATE	Generate beam section properties for a meshed cross-section.	Unsupported	Abaqus/Standard
*BEAM SECTION OFFSET	Define an offset for the beam cross-section origin.	Unsupported	Abaqus/Standard
*BIAXIAL TEST DATA	Used to provide biaxial test data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
*BLOCKAGE	Control contacting surfaces for blockage.	Unsupported	Abaqus/Explicit
*BOND	Define bonds and bonding properties.	Unsupported	Abaqus/Explicit
*BOUNDARY	Specify boundary conditions.	Load module; fluid cavity pressure and generalized plane strain boundary conditions are not supported.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*BRITTLE CRACKING	Define brittle cracking properties.	Property module	Abaqus/Explicit
*BRITTLE FAILURE	Specify brittle failure criterion.	Property module	Abaqus/Explicit
*BRITTLE SHEAR	Define the postcracking shear behavior of a material used with the brittle cracking model.	Property module	Abaqus/Explicit
*BUCKLE	Obtain eigenvalue buckling estimates.	Step module	Abaqus/Standard
*BUCKLING ENVELOPE	Define a nondefault buckling envelope for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
*BUCKLING LENGTH	Define buckling length data for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
*BUCKLING REDUCTION FACTORS	Define buckling reduction factors for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
*BULK VISCOSITY	Modify bulk viscosity parameters.	Step module	Abaqus/Explicit
*C ADDED MASS	Specify concentrated added mass in a *FREQUENCY step.	Unsupported	Abaqus/Aqua
*CAP CREEP	Specify a cap creep law and material properties.	Property module	Abaqus/Standard
*CAP HARDENING	Specify Drucker-Prager/Cap plasticity hardening.	Property module	Abaqus/Standard Abaqus/Explicit
*CAP PLASTICITY	Specify the Modified Drucker-Prager/Cap plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CAPACITY	Define the molar heat capacity at constant pressure for an ideal gas species.	Interaction module	Abaqus/Explicit
*CAST IRON COMPRESSION HARDENING	Specify hardening in compression for the gray cast iron plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CAST IRON PLASTICITY	Specify plastic material properties for gray cast iron.	Property module	Abaqus/Standard Abaqus/Explicit
*CAST IRON TENSION HARDENING	Specify hardening in tension for the gray cast iron plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CAVITY DEFINITION	Define a cavity for thermal radiation.	Interaction module	Abaqus/Standard
*CECHARGE	Specify concentrated electric charges in piezoelectric analysis.	Load module	Abaqus/Standard
*CECURRENT	Specify concentrated current in an electric conduction analysis.	Load module	Abaqus/Standard
*CENTROID	Define the position of the centroid of the beam section.	Property module	Abaqus/Standard Abaqus/Explicit
*CFD	Computational fluid dynamic analysis.	Step module	Abaqus/CFD
*CFILM	Define film coefficients and associated sink temperatures at one or more nodes or vertices.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CFLOW	Specify concentrated fluid flow.	Load module	Abaqus/Standard
*CFLUX	Specify concentrated fluxes in heat transfer or mass diffusion analyses.	Load module	Abaqus/Standard Abaqus/Explicit
*CHANGE FRICTION	Change friction properties.	Interaction module	Abaqus/Standard
*CHARACTERISTIC LENGTH	Define characteristic element length at a material point.	Unsupported	Abaqus/Explicit
*CLAY HARDENING	Specify hardening for the clay plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CLAY PLASTICITY	Specify the extended Cam-clay plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CLEARANCE	Specify a particular initial clearance value and a contact direction for the slave nodes on a surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CLOAD	Specify concentrated forces and moments.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD Abaqus/Aqua
*COHESIVE BEHAVIOR	Specify surface-based cohesive behavior properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
*COHESIVE SECTION	Specify element properties for cohesive elements.	Property module	Abaqus/Standard Abaqus/Explicit
*COMBINED TEST DATA	Specify simultaneously the normalized shear and bulk compliances or relaxation moduli as functions of time.	Property module	Abaqus/Standard Abaqus/Explicit
*COMPLEX FREQUENCY	Extract complex eigenvalues and modal vectors.	Step module	Abaqus/Standard
*COMPOSITE MODAL DAMPING	Specify composite modal damping for modal analyses based on the SIM architecture.	Unsupported	Abaqus/Standard
*CONCRETE	Define concrete properties beyond the elastic range.	Property module	Abaqus/Standard
*CONCRETE COMPRESSION DAMAGE	Define compression damage properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CONCRETE COMPRESSION HARDENING	Define hardening in compression for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CONCRETE DAMAGED PLASTICITY	Define flow potential, yield surface, and viscosity parameters for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CONCRETE TENSION DAMAGE	Define postcracking damage properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CONCRETE TENSION STIFFENING	Define postcracking properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CONDUCTIVITY	Specify thermal conductivity.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*CONNECTOR BEHAVIOR	Begin the specification of a connector behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR CONSTITUTIVE REFERENCE	Define reference lengths and angles to be used in specifying connector constitutive behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR DAMAGE EVOLUTION	Specify connector damage evolution for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR DAMAGE INITIATION	Specify connector damage initiation criteria for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR DAMPING	Define connector damping behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR DERIVED COMPONENT	Specify user-defined components in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR ELASTICITY	Define connector elastic behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR FAILURE	Define a failure criterion for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR FRICTION	Define friction forces and moments in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR HARDENING	Define the plasticity initial yield value and hardening behavior in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR LOAD	Specify loads for available components of relative motion in connector elements.	Load module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR LOCK	Define a locking criterion for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR MOTION	Specify the motion of available components of relative motion in connector elements.	Load module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR PLASTICITY	Define plasticity behavior in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR POTENTIAL	Specify user-defined potentials in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR SECTION	Specify connector attributes for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR STOP	Specify connector stops for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONNECTOR UNIAXIAL BEHAVIOR	Define uniaxial behavior in connector elements.	Interaction module	Abaqus/Explicit
*CONSTRAINT CONTROLS	Reset overconstraint checking controls.	Unsupported	Abaqus/Standard
*CONTACT	Begin the definition of general contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT CLEARANCE	Define contact clearance properties.	Unsupported	Abaqus/Explicit
*CONTACT CLEARANCE ASSIGNMENT	Assign contact clearances between surfaces in the general contact domain.	Unsupported	Abaqus/Explicit
*CONTACT CONTROLS	Specify additional controls for contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT CONTROLS ASSIGNMENT	Assign contact controls for the general contact algorithm.	Unsupported	Abaqus/Explicit
*CONTACT DAMPING	Define viscous damping between contacting surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT EXCLUSIONS	Specify self-contact surfaces or surface pairings to exclude from the general contact domain.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT FILE	Define results file requests for contact variables.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
*CONTACT FORMULATION	Specify a nondefault contact formulation for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT INCLUSIONS	Specify self-contact surfaces or surface pairings to include in the general contact domain.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT INITIALIZATION ASSIGNMENT	Assign contact initialization methods for general contact.	Interaction module	Abaqus/Standard
*CONTACT INITIALIZATION DATA	Define contact initialization methods for general contact.	Interaction module	Abaqus/Standard
*CONTACT INTERFERENCE	Prescribe time-dependent allowable interferences of contact pairs and contact elements.	Interaction module	Abaqus/Standard
*CONTACT OUTPUT	Specify contact variables to be written to the output database.	Step module	Abaqus/Standard Abaqus/Explicit
*CONTACT PAIR	Define surfaces that contact each other.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT PERMEABILITY	Specify fluid permeability contact property.	Unsupported	Abaqus/Standard
*CONTACT PRINT	Define print requests for contact variables.	Unsupported	Abaqus/Standard
*CONTACT PROPERTY ASSIGNMENT	Assign contact properties for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CONTACT RESPONSE	Define contact responses for design sensitivity analysis.	Unsupported	Abaqus/Design
*CONTACT STABILIZATION	Define contact stabilization controls for general contact.	Interaction module	Abaqus/Standard
*CONTOUR INTEGRAL	Provide contour integral estimates.	Interaction module	Abaqus/Standard
*CONTROLS	Reset solution controls.	Step module	Abaqus/Standard Abaqus/CFD
*CONWEP CHARGE PROPERTY	Define a CONWEP charge for incident waves.	Unsupported	Abaqus/Explicit
*CORRELATION	Define cross-correlation properties for random response loading.	Unsupported	Abaqus/Standard
*CO-SIMULATION	Identify the analysis program for co-simulation with Abaqus.	Interaction module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*CO-SIMULATION CONTROLS	Specify the coupling and rendezvousing scheme for co-simulation.	Interaction module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*CO-SIMULATION REGION	Identify the interface regions in the Abaqus model and specify the fields to be exchanged during co-simulation.	Interaction module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*COUPLED TEMPERATURE-DISPLACEMENT	Fully coupled, simultaneous heat transfer and stress analysis.	Step module	Abaqus/Standard
*COUPLED THERMAL-ELECTRICAL	Fully coupled, simultaneous heat transfer and electrical analysis.	Step module	Abaqus/Standard
*COUPLING	Define a surface-based coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CRADIATE	Specify radiation conditions and associated sink temperatures at one or more nodes or vertices.	Interaction module	Abaqus/Standard Abaqus/Explicit
*CREEP	Define a creep law.	Property module	Abaqus/Standard
*CREEP STRAIN RATE CONTROL	Control loadings based on the maximum equivalent creep strain rate.	Unsupported	Abaqus/Standard
*CRUSHABLE FOAM	Specify the crushable foam plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CRUSHABLE FOAM HARDENING	Specify hardening for the crushable foam plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*CYCLED PLASTIC	Specify cycled yield stress data for the *ORNL model.	Property module	Abaqus/Standard
*CYCLIC	Define cyclic symmetry for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
*CYCLIC HARDENING	Specify the size of the elastic range for the combined hardening model.	Property module	Abaqus/Standard Abaqus/Explicit
*CYCLIC SYMMETRY MODEL	Define the number of sectors and the axis of symmetry for a cyclic symmetric structure.	Interaction module	Abaqus/Standard
*D ADDED MASS	Specify distributed added mass in a *FREQUENCY step.	Unsupported	Abaqus/Aqua
*D EM POTENTIAL	Specify distributed surface magnetic vector potential.	Load module	Abaqus/Standard
*DAMAGE EVOLUTION	Specify material properties to define the evolution of damage.	Property module	Abaqus/Standard Abaqus/Explicit
*DAMAGE INITIATION	Specify material and contact properties to define the initiation of damage.	Property module	Abaqus/Standard Abaqus/Explicit
*DAMAGE STABILIZATION	Specify viscosity coefficients for the damage model for fiber-reinforced materials, surface-based cohesive behavior or cohesive behavior in enriched elements.	Property module	Abaqus/Standard Abaqus/Explicit
*DAMPING	Specify material damping.	Property module	Abaqus/Standard Abaqus/Explicit
*DAMPING CONTROLS	Specify damping controls.	Supported in the Step module only for substructure generation.	Abaqus/Standard
*DASHPOT	Define dashpot behavior.	Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, model connectors in the Interaction module.	Abaqus/Standard Abaqus/Explicit
*DEBOND	Activate crack propagation capability and specify debonding amplitude curve.	Interaction module	Abaqus/Standard
*DECHARGE	Input distributed electric charges for piezoelectric analysis.	Load module	Abaqus/Standard
*DECURRENT	Specify distributed current densities in an electromagnetic analysis.	Load module	Abaqus/Standard
*DEFORMATION PLASTICITY	Specify the deformation plasticity model.	Property module	Abaqus/Standard
*DENSITY	Specify material mass density.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DEPVAR	Specify solution-dependent state variables.	Property module	Abaqus/Standard Abaqus/Explicit
*DESIGN GRADIENT	Directly specify design gradients for design sensitivity analysis.	Unsupported	Abaqus/Design
*DESIGN PARAMETER	Specify design parameters with respect to which sensitivities are calculated.	Unsupported	Abaqus/Design
*DESIGN RESPONSE	Specify responses for design sensitivity analysis.	Unsupported	Abaqus/Design
*DETONATION POINT	Define detonation points for a JWL explosive equation of state.	Property module	Abaqus/Standard Abaqus/Explicit
*DFLOW	Specify distributed seepage flows for consolidation analysis.	Load module	Abaqus/Standard Abaqus/CFD
*DFLUX	Specify distributed fluxes in heat transfer, computational fluid dynamics, or mass diffusion analyses.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DIAGNOSTICS	Control diagnostic messages.	Unsupported	Abaqus/Standard Abaqus/Explicit
*DIELECTRIC	Specify dielectric material properties.	Property module	Abaqus/Standard
*DIFFUSIVITY	Specify mass diffusivity.	Property module	Abaqus/Standard
*DIRECT CYCLIC	Obtain the stabilized cyclic response of a structure directly.	Step module	Abaqus/Standard
*DISCRETE ELASTICITY	Specify effective elastic material properties for discrete particles.	Unsupported	Abaqus/Explicit
*DISCRETE SECTION	Specify element properties for discrete elements.	Property module	Abaqus/Explicit
*DISPLAY BODY	Define a part instance that will be used for display only.	Interaction module	Abaqus/Standard Abaqus/Explicit
*DISTRIBUTING	Define a distributing coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
*DISTRIBUTING COUPLING	Specify nodes and weighting for distributing coupling elements.	Unsupported; this option has been superseded by coupling constraints used in conjunction with the distributing option.	Abaqus/Standard
*DISTRIBUTION	Define spatial distributions.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DISTRIBUTION TABLE	Define a distribution table.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DLOAD	Specify distributed loads.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD Abaqus/Aqua
*DOMAIN DECOMPOSITION	Define a region for domain decomposition and/or define constraints on the domain decomposition.	Unsupported	Abaqus/Explicit
*DRAG CHAIN	Specify parameters for drag chain elements.	Unsupported	Abaqus/Standard
*DRUCKER PRAGER	Specify the extended Drucker-Prager plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*DRUCKER PRAGER CREEP	Specify a Drucker-Prager creep law and material properties.	Property module	Abaqus/Standard
*DRUCKER PRAGER HARDENING	Specify hardening for Drucker-Prager plasticity models.	Property module	Abaqus/Standard Abaqus/Explicit
*DSA CONTROLS	Set DSA solution controls.	Unsupported	Abaqus/Design
*DSECHARGE	Input distributed electric surface charges for piezoelectric analysis.	Load module	Abaqus/Standard
*DSECURRENT	Specify distributed current densities over a surface in an electromagnetic analysis.	Load module	Abaqus/Standard
*DSFLOW	Specify distributed seepage flows normal to a surface.	Load module	Abaqus/Standard
*DSFLUX	Specify distributed surface fluxes for heat transfer analysis.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DSLOAD	Specify distributed surface loads.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*DYNAMIC	Dynamic stress/displacement analysis.	Step module	Abaqus/Standard Abaqus/Explicit
*DYNAMIC TEMPERATURE-DISPLACEMENT	Dynamic coupled thermal-stress analysis using explicit integration.	Step module	Abaqus/Explicit
*EL FILE	Define results file requests for element variables.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
*EL PRINT	Define data file requests for element variables.	Unsupported	Abaqus/Standard
*ELASTIC	Specify elastic material properties.	Property module	Abaqus/Standard Abaqus/Explicit
*ELCOPY	Create elements by copying from an existing element set.	Not applicable; copying portions of sketches and instancing of parts serve similar purposes.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ELECTRICAL CONDUCTIVITY	Specify electrical conductivity.	Property module	Abaqus/Standard
*ELECTROMAGNETIC	Electromagnetic response.	Step module	Abaqus/Standard
*ELEMENT	Define elements by giving their nodes.	Mesh module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ELEMENT MATRIX OUTPUT	Write element stiffness matrices and mass matrices to a file.	Unsupported	Abaqus/Standard
*ELEMENT OPERATOR OUTPUT	Write element operator output to a SIM document.	Unsupported	Abaqus/Standard
*ELEMENT OUTPUT	Define output database requests for element variables.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ELEMENT RESPONSE	Define element responses for design sensitivity analysis.	Unsupported	Abaqus/Design
*ELGEN	Incremental element generation.	Not applicable; elements are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ELSET	Assign elements to an element set.	Set toolset	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*EMBEDDED ELEMENT	Specify an element or a group of elements that lie embedded in a group of “host” elements in a model.	Interaction module	Abaqus/Standard Abaqus/Explicit
*EMISSIVITY	Specify surface emissivity.	Interaction module	Abaqus/Standard
*END ASSEMBLY	End the definition of an assembly.	Assembly module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*END INSTANCE	End the definition of an instance.	Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*END LOAD CASE	End the definition of a load case for multiple load case analysis.	Load module	Abaqus/Standard
*END PART	End the definition of a part.	Part module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*END STEP	End the definition of a step.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ENERGY EQUATION SOLVER	Specify the linear solver and parameters for solving the conduction equations in an Abaqus/CFD analysis.	Unsupported	Abaqus/CFD
*ENERGY FILE	Write energy output to the results file.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
*ENERGY OUTPUT	Define output database requests for whole model or element set energy data.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ENERGY PRINT	Print a summary of the total energies.	Unsupported	Abaqus/Standard
*ENRICHMENT	Specify an enriched feature and the properties of the enrichment.	Interaction module	Abaqus/Standard
*ENRICHMENT ACTIVATION	Activate or deactivate an enriched feature.	Interaction module	Abaqus/Standard
*EOS	Specify an equation of state model.	Property module	Abaqus/Explicit Abaqus/CFD
*EOS COMPACTION	Specify plastic compaction behavior for an equation of state model.	Property module	Abaqus/Standard Abaqus/Explicit
*EPJOINT	Define properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
*EQUATION	Define linear multi-point constraints.	Interaction module	Abaqus/Standard Abaqus/Explicit
*EULERIAN BOUNDARY	Define inflow and outflow conditions at Eulerian mesh boundaries.	Load module	Abaqus/Explicit
*EULERIAN MESH MOTION	Define the motion of an Eulerian mesh.	Load module	Abaqus/Explicit
*EULERIAN SECTION	Specify element properties for Eulerian elements.	Property module	Abaqus/Explicit
*EXPANSION	Specify thermal or field expansion.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*EXTREME ELEMENT VALUE	Define element variables to be monitored.	Unsupported	Abaqus/Explicit
*EXTREME NODE VALUE	Define nodal variables to be monitored.	Unsupported	Abaqus/Explicit
*EXTREME VALUE	Define element and nodal variables to be monitored.	Unsupported	Abaqus/Explicit
*FABRIC	Specify the in-plane response of a fabric material.	Unsupported	Abaqus/Explicit
*FAIL STRAIN	Define parameters for strain-based failure measures.	Property module	Abaqus/Standard Abaqus/Explicit
*FAIL STRESS	Define parameters for stress-based failure measures.	Property module	Abaqus/Standard Abaqus/Explicit
*FAILURE RATIOS	Define the shape of the failure surface for a *CONCRETE model.	Property module	Abaqus/Standard
*FASTENER	Define mesh-independent fasteners.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FASTENER PROPERTY	Prescribe mesh-independent fastener properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FIELD	Specify predefined field variable values.	Unsupported	Abaqus/Standard Abaqus/Explicit
*FILE FORMAT	Specify format for results file output and invoke zero-increment results file output.	Unsupported; Abaqus/CAE does not use the results file.	Abaqus/Standard
*FILE OUTPUT	Define output written to the results file.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Explicit
*FILM	Define film coefficients and associated sink temperatures.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FILM PROPERTY	Define a film coefficient as a function of temperature and field variables.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FILTER	Define a filter and/or operator for output filtering and/or operating.	Filter toolset	Abaqus/Explicit
*FIXED MASS SCALING	Specify mass scaling at the beginning of the step.	Step module	Abaqus/Explicit
*FLEXIBLE BODY	Generate a flexible body from a substructure.	Unsupported	Abaqus/Standard
*FLOW	Define seepage coefficients and associated sink pore pressures.	Unsupported	Abaqus/Standard
*FLUID BEHAVIOR	Define fluid behavior for a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID BOUNDARY	Specify boundary conditions for fluid flow analyses.	Load module	Abaqus/CFD
*FLUID BULK MODULUS	Define compressibility for a hydraulic fluid.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID CAVITY	Define a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID DENSITY	Specify hydrostatic fluid density.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID EXCHANGE	Define fluid exchange.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID EXCHANGE ACTIVATION	Activate fluid exchange definitions.	Unsupported	Abaqus/Explicit
*FLUID EXCHANGE PROPERTY	Define the fluid exchange property for flow in or out of a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID EXPANSION	Specify the thermal expansion coefficient for a hydraulic fluid.	Interaction module	Abaqus/Standard Abaqus/Explicit
*FLUID FLUX	Change the amount of fluid in a fluid-filled cavity.	Unsupported	Abaqus/Standard Abaqus/Explicit
*FLUID INFLATOR	Define a fluid inflator.	Unsupported	Abaqus/Explicit
*FLUID INFLATOR ACTIVATION	Activate fluid inflator definitions.	Unsupported	Abaqus/Explicit
*FLUID INFLATOR MIXTURE	Define gas species used for a fluid inflator.	Unsupported	Abaqus/Explicit
*FLUID INFLATOR PROPERTY	Define a fluid inflator property.	Unsupported	Abaqus/Explicit
*FLUID LEAKOFF	Define fluid leak-off coefficients for pore pressure cohesive elements.	Property module	Abaqus/Standard
*FLUID PIPE CONNECTOR LOSS	Specify fluid pipe connector element loss.	Unsupported	Abaqus/Standard
*FLUID PIPE CONNECTOR SECTION	Specify fluid pipe connector element section properties.	Unsupported	Abaqus/Standard
*FLUID PIPE FLOW LOSS	Specify fluid pipe element loss.	Unsupported	Abaqus/Standard
*FLUID PIPE SECTION	Specify fluid pipe element section properties.	Unsupported	Abaqus/Standard
*FLUID SECTION	Specify element properties for fluid and porous media elements.	Property module	Abaqus/CFD
*FOUNDATION	Prescribe element foundations.	Interaction module	Abaqus/Standard
*FRACTURE CRITERION	Specify crack propagation criteria.	Property module and Interaction module	Abaqus/Standard Abaqus/Explicit
*FRAME SECTION	Specify a frame section.	Unsupported	Abaqus/Standard
*FREQUENCY	Extract natural frequencies and modal vectors.	Step module	Abaqus/Standard Abaqus/AMS
*FRICTION	Specify a friction model.	Interaction module	Abaqus/Standard Abaqus/Explicit
*GAP	Specify clearance and local geometry for GAP-type elements.	Unsupported; similar functionality is available by modeling connectors.	Abaqus/Standard
*GAP CONDUCTANCE	Introduce heat conductance between interface surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
*GAP ELECTRICAL CONDUCTANCE	Specify electrical conductance between surfaces.	Unsupported	Abaqus/Standard
*GAP FLOW	Define constitutive parameters for tangential flow in pore pressure cohesive elements.	Property module	Abaqus/Standard
*GAP HEAT GENERATION	Introduce heat generation due to energy dissipation at the interface.	Interaction module	Abaqus/Standard Abaqus/Explicit
*GAP RADIATION	Introduce heat radiation between surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
*GAS SPECIFIC HEAT	Define reacted product's specific heat for an ignition and growth equation of state.	Property module	Abaqus/Explicit
*GASKET BEHAVIOR	Begin the specification of a gasket behavior.	Property module	Abaqus/Standard
*GASKET CONTACT AREA	Specify a gasket contact area or contact width for average pressure output.	Property module	Abaqus/Standard
*GASKET ELASTICITY	Specify elastic properties for the membrane and transverse shear behaviors of a gasket.	Property module	Abaqus/Standard
*GASKET SECTION	Specify element properties for gasket elements.	Property module	Abaqus/Standard
*GASKET THICKNESS BEHAVIOR	Specify a gasket thickness-direction behavior.	Property module	Abaqus/Standard
*GEL	Define a swelling gel.	Property module	Abaqus/Standard
*GEOSTATIC	Obtain a geostatic stress field.	Step module	Abaqus/Standard
*GLOBAL DAMPING	Specify global damping.	Supported in the Step module only for substructure generation.	Abaqus/Standard
*HEADING	Print a heading on the output.	Job module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*HEAT GENERATION	Include volumetric heat generation in heat transfer analyses.	Property module	Abaqus/Standard
*HEAT TRANSFER	Transient or steady-state uncoupled heat transfer analysis.	Step module	Abaqus/Standard Abaqus/CFD
*HEATCAP	Specify a point capacitance.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
*HOURGLASS STIFFNESS	Specify nondefault hourglass stiffness.	Mesh module	Abaqus/Standard
*HYPERELASTIC	Specify elastic properties for approximately incompressible elastomers.	Property module	Abaqus/Standard Abaqus/Explicit
*HYPERFOAM	Specify elastic properties for a hyperelastic foam.	Property module	Abaqus/Standard Abaqus/Explicit
*HYPOELASTIC	Specify hypoelastic material properties.	Property module	Abaqus/Standard
*HYSTERESIS	Specify a rate-dependent elastomer model.	Property module	Abaqus/Standard
*IMPEDANCE	Define impedances for acoustic analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
*IMPEDANCE PROPERTY	Define the impedance parameters for an acoustic medium boundary.	Interaction module	Abaqus/Standard Abaqus/Explicit
*IMPERFECTION	Introduce geometric imperfections for postbuckling analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
*IMPORT	Import information from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Supported for use in conjunction with part instances; importing selected part instances stored in an output database is supported using the File menu and importing the initial state of part instances is supported in the Load module.	Abaqus/Standard Abaqus/Explicit
*IMPORT CONTROLS	Specify tolerances used in importing model and results data.	Unsupported	Abaqus/Standard Abaqus/Explicit
*IMPORT ELSET	Import element set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
*IMPORT NSET	Import node set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE	Define incident wave loading for a blast or scattering load on a boundary.	Unsupported; this option has been superseded by incident wave interactions.	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE FLUID PROPERTY	Define the fluid properties associated with an incident wave.	Unsupported; this option has been superseded by incident wave interaction properties.	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE INTERACTION	Define incident wave loading for a blast or scattering load on a surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE INTERACTION PROPERTY	Define the geometric data and fluid properties describing an incident wave.	Interaction module	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE PROPERTY	Define the geometric data describing an incident wave.	Unsupported; this option has been superseded by incident wave interaction properties.	Abaqus/Standard Abaqus/Explicit
*INCIDENT WAVE REFLECTION	Define the reflection load on a surface caused by incident wave fields.	Unsupported	Abaqus/Standard Abaqus/Explicit
*INCLUDE	Reference an external file containing Abaqus input data.	Several input data options in Abaqus/CAE provide the capability to reference external files; for example, the material editor can read material properties from an ASCII file.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*INCREMENTATION OUTPUT	Define output database requests for time incrementation data.	Step module	Abaqus/Standard Abaqus/Explicit
*INELASTIC HEAT FRACTION	Define the fraction of the rate of inelastic dissipation that appears as a heat source.	Property module	Abaqus/Standard Abaqus/Explicit
*INERTIA RELIEF	Apply inertia-based load balancing.	Load module	Abaqus/Standard
*INITIAL CONDITIONS	Specify initial conditions for the model.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD Abaqus/Aqua
*INSTANCE	Begin an instance definition.	Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*INTEGRATED OUTPUT	Specify variables integrated over a surface to be written to the output database.	Step module	Abaqus/Standard Abaqus/Explicit
*INTEGRATED OUTPUT SECTION	Define an integrated output section over a surface with a local coordinate system and a reference point.	Step module	Abaqus/Standard Abaqus/Explicit
*INTERFACE	Define properties for contact elements.	Property module; supported for two-dimensional, three-dimensional, and axisymmetric acoustic interface elements. Contact elements are not supported.	Abaqus/Standard
*ITS	Define properties for ITS elements.	Unsupported; similar functionality (with the exception of friction) is available by modeling connectors.	Abaqus/Standard
*JOINT	Define properties for JOINTC elements.	Unsupported; similar functionality is available by modeling connectors.	Abaqus/Standard
*JOINT ELASTICITY	Specify elastic properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
*JOINT PLASTICITY	Specify plastic properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
*JOINTED MATERIAL	Specify the jointed material model.	Unsupported	Abaqus/Standard
*JOULE HEAT FRACTION	Define the fraction of electric energy released as heat.	Property module	Abaqus/Standard
*KAPPA	Specify the material parameters for mass diffusion driven by gradients of temperature and equivalent pressure stress.	Property module	Abaqus/Standard
*KINEMATIC	Define a kinematic coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
*KINEMATIC COUPLING	Constrain all or specific degrees of freedom of a set of nodes to the rigid body motion of a reference node.	Unsupported; this option has been superseded by coupling constraints used in conjunction with the kinematic option.	Abaqus/Standard
*LATENT HEAT	Specify latent heats.	Property module	Abaqus/Standard Abaqus/Explicit
*LOAD CASE	Begin a load case definition for multiple load case analysis.	Load module	Abaqus/Standard
*LOADING DATA	Provide loading data for uniaxial behavior models in connectors or provide data from a uniaxial or a shear loading test for fabric materials.	Unsupported	Abaqus/Explicit
*LOW DENSITY FOAM	Specify properties for a low-density foam.	Property module	Abaqus/Explicit
*MAGNETIC PERMEABILITY	Specify magnetic permeability.	Property module	Abaqus/Standard
*MAGNETOSTATIC	Magnetostatic analysis.	Step module	Abaqus/Standard
*MAP SOLUTION	Map a solution from an old mesh to a new mesh.	Unsupported	Abaqus/Standard
*MASS	Specify a point mass.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
*MASS ADJUST	Adjust and/or redistribute the mass of an element set.	Unsupported	Abaqus/Explicit
*MASS DIFFUSION	Transient or steady-state uncoupled mass diffusion analysis.	Step module	Abaqus/Standard
*MASS FLOW RATE	Specify fluid mass flow rate in a heat transfer analysis.	Unsupported	Abaqus/Standard
*MATERIAL	Begin the definition of a material.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*MATRIX	Read in the stiffness or mass matrix for a linear user element.	Unsupported	Abaqus/Standard
*MATRIX ASSEMBLE	Define stiffness, mass, or damping matrices for a part of the model.	Unsupported	Abaqus/Standard
*MATRIX CHECK	Check the quality of the generated stiffness and mass matrices.	Unsupported	Abaqus/Standard
*MATRIX GENERATE	Generate global or element matrices.	Unsupported	Abaqus/Standard
*MATRIX INPUT	Read in a matrix for a part of the model.	Unsupported	Abaqus/Standard
*MATRIX OUTPUT	Output generated matrices in various forms.	Unsupported	Abaqus/Standard
*MEDIA TRANSPORT	Activate or deactivate a periodic media.	Unsupported	Abaqus/Explicit
*MEMBRANE SECTION	Specify section properties for membrane elements.	Property module	Abaqus/Standard Abaqus/Explicit
*MODAL DAMPING	Specify damping for modal dynamic analysis.	Step module	Abaqus/Standard
*MODAL DYNAMIC	Dynamic time history analysis using modal superposition.	Step module	Abaqus/Standard
*MODAL FILE	Write generalized coordinate (modal amplitude) data or eigendata to the results file during a mode-based dynamic or eigenvalue extraction procedure.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
*MODAL OUTPUT	Write generalized coordinate (modal amplitude) data to the output database during a mode-based dynamic or complex eigenvalue extraction procedure.	Step module	Abaqus/Standard
*MODAL PRINT	Print generalized coordinate (modal amplitude) data during a mode-based dynamic procedure.	Unsupported	Abaqus/Standard
*MODEL CHANGE	Remove or reactivate elements and contact pairs.	Interaction module	Abaqus/Standard
*MOHR COULOMB	Specify the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*MOHR COULOMB HARDENING	Specify hardening for the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*MOISTURE SWELLING	Define moisture-driven swelling.	Property module	Abaqus/Standard
*MOLECULAR WEIGHT	Define the molecular weight of an ideal gas species.	Interaction module	Abaqus/Standard Abaqus/Explicit
*MOMENTUM EQUATION SOLVER	Specify the linear solver and parameters for solving the momentum equations in an Abaqus/CFD analysis.	Step module	Abaqus/CFD
*MONITOR	Define a degree of freedom to monitor.	Step module	Abaqus/Standard Abaqus/Explicit
*MOTION	Specify motions as a predefined field.	Unsupported	Abaqus/Standard
*MPC	Define multi-point constraints.	Interaction module	Abaqus/Standard Abaqus/Explicit
*MULLINS EFFECT	Specify Mullins effect material parameters for elastomers.	Property module	Abaqus/Standard Abaqus/Explicit
*M1	Define the first bending moment behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
*M2	Define the second bending moment behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
*NCOPY	Create nodes by copying.	Not applicable; copying portions of sketches and instancing of parts serve similar purposes.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NETWORK STIFFNESS RATIO	Specify stiffness ratios for viscoelastic networks.	Property module	Abaqus/Standard Abaqus/Explicit
*NFILL	Fill in nodes in a region.	Not applicable; nodes are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NGEN	Generate incremental nodes.	Not applicable; nodes are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NMAP	Map nodes from one coordinate system to another and rotate, translate, or scale the nodal coordinates.	Unsupported; meshing techniques in the Mesh module are usually preferable.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NO COMPRESSION	Introduce a compressive failure theory (tension only materials).	Property module	Abaqus/Standard
*NO TENSION	Introduce a tension failure theory (compression only material).	Property module	Abaqus/Standard
*NODAL ENERGY RATE	Define critical energy release rates at nodes.	Unsupported	Abaqus/Standard Abaqus/Explicit
*NODAL THICKNESS	Define shell or membrane thickness at nodes.	Property module	Abaqus/Standard Abaqus/Explicit
*NODE	Specify nodal coordinates.	Mesh module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NODE FILE	Define results file requests for nodal data.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
*NODE OUTPUT	Define output database requests for nodal data.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*NODE PRINT	Define print requests for nodal variables.	Unsupported	Abaqus/Standard
*NODE RESPONSE	Define nodal responses for design sensitivity analysis.	Unsupported	Abaqus/Design
*NONLINEAR BH	Specify nonlinear magnetic behavior of a soft magnetic material.	Property module	Abaqus/Standard
*NONSTRUCTURAL MASS	Specify mass contribution to the model from nonstructural features.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
*NORMAL	Specify a particular normal direction.	Unsupported	Abaqus/Standard Abaqus/Explicit
*NSET	Assign nodes to a node set.	Set toolset	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*ORIENTATION	Define a local axis system for material or element property definition, for kinematic coupling constraints, for free directions for inertia relief loads, or for connectors.	Property module, Interaction module, and Load module	Abaqus/Standard Abaqus/Explicit
*ORNL	Specify constitutive model developed by Oak Ridge National Laboratory.	Property module	Abaqus/Standard
*OUTPUT	Define output requests to the output database.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*PARAMETER	Define parameters for input parametrization.	Unsupported	Abaqus/Standard Abaqus/Explicit
*PARAMETER DEPENDENCE	Define dependence table for tabularly dependent parameters.	Unsupported	Abaqus/Standard Abaqus/Explicit
*PARAMETER SHAPE VARIATION	Define parametric shape variations.	Unsupported	Abaqus/Standard Abaqus/Explicit
*PART	Begin a part definition.	Part module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*PARTICLE GENERATOR	Specify a particle generator.	Property module	Abaqus/Explicit
*PARTICLE GENERATOR FLOW	Specify flow speed and mass flow rate per unit inlet area for a particle species.	Property module	Abaqus/Explicit
*PARTICLE GENERATOR INLET	Specify a particle generator inlet surface.	Property module	Abaqus/Explicit
*PARTICLE GENERATOR MIXTURE	Specify particle generator species mixture.	Property module	Abaqus/Explicit
*PERFECTLY MATCHED LAYER	Specify perfectly matched layer properties.	Unsupported	Abaqus/Standard
*PERIODIC	Define periodic symmetry for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
*PERIODIC MEDIA	Specify a periodic media.	Unsupported	Abaqus/Explicit
*PERMANENT MAGNETIZATION	Specify permanent magnetization.	Unsupported	Abaqus/Standard
*PERMEABILITY	Define permeability for pore fluid flow.	Property module	Abaqus/Standard Abaqus/CFD
*PHYSICAL CONSTANTS	Specify physical constants.	Model attribute	Abaqus/Standard Abaqus/Explicit
*PIEZOELECTRIC	Specify piezoelectric material properties.	Property module	Abaqus/Standard
*PIPE-SOIL INTERACTION	Specify element properties for pipe-soil interaction elements.	Unsupported	Abaqus/Standard
*PIPE-SOIL STIFFNESS	Define constitutive behavior for pipe-soil interaction elements.	Unsupported	Abaqus/Standard
*PLANAR TEST DATA	Used to provide planar test (or pure shear) data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
*PLASTIC	Specify a metal plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*PLASTIC AXIAL	Define plastic axial force for frame elements.	Unsupported	Abaqus/Standard
*PLASTIC M1	Define the first plastic bending moment behavior for frame elements.	Unsupported	Abaqus/Standard
*PLASTIC M2	Define the second plastic bending moment behavior for frame elements.	Unsupported	Abaqus/Standard
*PLASTIC TORQUE	Define the plastic torsional moment behavior for frame elements.	Unsupported	Abaqus/Standard
*PML COEFFICIENT	Specify perfectly matched layer coefficients.	Unsupported	Abaqus/Standard
*POROUS BULK MODULI	Define bulk moduli for soils and rocks.	Property module	Abaqus/Standard
*POROUS ELASTIC	Specify elastic material properties for porous materials.	Property module	Abaqus/Standard
*POROUS FAILURE CRITERIA	Define porous material failure criteria for a *POROUS METAL PLASTICITY model.	Property module	Abaqus/Explicit
*POROUS METAL PLASTICITY	Specify a porous metal plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*POST OUTPUT	Postprocess for output from the restart file.	Unsupported	Abaqus/Standard
*POTENTIAL	Define an anisotropic yield/creep model.	Property module	Abaqus/Standard Abaqus/Explicit
*PREPRINT	Select printout for the analysis input file processor.	Job module	Abaqus/Standard Abaqus/Explicit
*PRESSURE EQUATION SOLVER	Specify the linear solver and parameters for solving the pressure equation for incompressible flows.	Step module	Abaqus/CFD
*PRESSURE PENETRATION	Specify pressure penetration loads with surface-based contact.	Interaction module	Abaqus/Standard
*PRESSURE STRESS	Specify equivalent pressure stress as a predefined field for a mass diffusion analysis.	Unsupported	Abaqus/Standard
*PRESTRESS HOLD	Keep rebar prestress constant during initial equilibrium solution.	Unsupported	Abaqus/Standard
*PRE-TENSION SECTION	Associate a pre-tension node with a pre-tension section.	Load module	Abaqus/Standard
*PRINT	Request or suppress output to the message file in an Abaqus/Standard analysis or to the status file in an Abaqus/Explicit analysis.	Step module	Abaqus/Standard Abaqus/Explicit
*PROBABILITY DENSITY FUNCTION	Specify a probability density function.	Property module	Abaqus/Explicit
*PSD-DEFINITION	Define a cross-spectral density frequency function for random response loading.	Unsupported	Abaqus/Standard
*RADIATE	Specify radiation conditions in heat transfer analyses.	Interaction module	Abaqus/Standard Abaqus/Explicit
*RADIATION FILE	Define results file requests for cavity radiation heat transfer.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
*RADIATION OUTPUT	Define output database requests for cavity radiation variables.	Step module	Abaqus/Standard
*RADIATION PRINT	Define print requests for cavity radiation heat transfer.	Unsupported	Abaqus/Standard
*RADIATION SYMMETRY	Define cavity symmetries for radiation heat transfer analysis.	Interaction module	Abaqus/Standard
*RADIATION VIEW FACTOR	Control cavity radiation and view factor calculations.	Interaction module	Abaqus/Standard
*RANDOM RESPONSE	Calculate response to random loading.	Step module	Abaqus/Standard
*RATE DEPENDENT	Define a rate-dependent viscoplastic model.	Property module	Abaqus/Standard Abaqus/Explicit
*RATIOS	Define anisotropic swelling.	Property module	Abaqus/Standard
*REACTION RATE	Define the reaction rate for an ignition and growth equation of state.	Property module	Abaqus/Explicit
*REBAR	Define rebar as an element property.	Unsupported	Abaqus/Standard Abaqus/Explicit
*REBAR LAYER	Define layers of reinforcement in membrane, shell, surface, and continuum elements.	Property module; supported only for membrane and shell elements.	Abaqus/Standard Abaqus/Explicit
*REFLECTION	Define reflection symmetries for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
*RELEASE	Release rotational degrees of freedom at one or both ends of a beam element.	Unsupported	Abaqus/Standard
*RESPONSE SPECTRUM	Calculate the response based on user-supplied response spectra.	Step module	Abaqus/Standard
*RESTART	Save and reuse data and analysis results.	Step module for saving restart data; Job module for performing a restart analysis	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*RETAINED NODAL DOFS	Specify the degrees of freedom that are to be retained as external to a substructure.	Unsupported	Abaqus/Standard
*RIGID BODY	Define a set of elements as a rigid body and define rigid element properties.	Part module and Interaction module	Abaqus/Standard Abaqus/Explicit
*RIGID SURFACE	Define an analytical rigid surface.	Part module	Abaqus/Standard
*ROTARY INERTIA	Define rigid body rotary inertia.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
*SECTION CONTROLS	Specify section controls.	Mesh module	Abaqus/Standard Abaqus/Explicit
*SECTION FILE	Define results file requests of accumulated quantities on user-defined surface sections.	Unsupported	Abaqus/Standard
*SECTION ORIGIN	Define a meshed cross-section origin.	Unsupported	Abaqus/Standard
*SECTION POINTS	Locate points in the beam section for which stress and strain output are required.	Property module	Abaqus/Standard Abaqus/Explicit
*SECTION PRINT	Define print requests of accumulated quantities on user-defined surface sections.	Unsupported	Abaqus/Standard
*SELECT CYCLIC SYMMETRY MODES	Specify the cyclic symmetry modes in an eigenvalue analysis of a cyclic symmetric structure.	Interaction module	Abaqus/Standard
*SELECT EIGENMODES	Select the modes to be used in a modal dynamic, complex eigenvalue extraction, or substructure generation analysis.	Supported in the Step module only for substructure generation.	Abaqus/Standard
*SFILM	Define film coefficients and associated sink temperatures over a surface for heat transfer analysis.	Interaction module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*SFLOW	Define seepage coefficients and associated sink pore pressures normal to a surface.	Unsupported	Abaqus/Standard
*SHEAR CENTER	Define the position of the shear center of a beam section.	Property module	Abaqus/Standard Abaqus/Explicit
*SHEAR FAILURE	Specify a shear failure model and criterion.	Unsupported	Abaqus/Explicit
*SHEAR RETENTION	Define the reduction of the shear modulus associated with crack surfaces in a *CONCRETE model as a function of the tensile strain across the crack.	Property module	Abaqus/Standard
*SHEAR TEST DATA	Used to provide shear test data.	Property module	Abaqus/Standard Abaqus/Explicit
*SHELL GENERAL SECTION	Define a general, arbitrary, elastic shell section.	Property module	Abaqus/Standard Abaqus/Explicit
*SHELL SECTION	Specify a shell cross-section.	Property module	Abaqus/Standard Abaqus/Explicit
*SHELL TO SOLID COUPLING	Define a surface-based coupling between a shell edge and a solid face.	Interaction module	Abaqus/Standard Abaqus/Explicit
*SIMPEDANCE	Define impedances of acoustic surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
*SIMPLE SHEAR TEST DATA	Used to provide simple shear test data.	Property module	Abaqus/Standard Abaqus/Explicit
*SLIDE LINE	Specify slide line surfaces on which deformable structures may interact.	Unsupported; the Interaction module uses surface-based contact.	Abaqus/Standard
*SLOAD	Apply loads to a substructure.	Load module	Abaqus/Standard
*SOFTENING REGULARIZATION	Specify softening regularization for the clay plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*SOILS	Effective stress analysis for fluid-filled porous media.	Step module	Abaqus/Standard
*SOLID SECTION	Specify element properties for solid, infinite, acoustic, particle, and truss elements.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*SOLUBILITY	Specify solubility.	Property module	Abaqus/Standard
*SOLUTION TECHNIQUE	Specify alternative solution methods.	Step module	Abaqus/Standard
*SOLVER CONTROLS	Specify controls for the iterative and direct linear solvers.	Step module	Abaqus/Standard
*SORPTION	Define absorption and exsorption behavior.	Property module	Abaqus/Standard
*SPECIFIC HEAT	Define specific heat.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*SPECTRUM	Define or create a response spectrum.	Amplitude toolset; supported only for defining a spectrum.	Abaqus/Standard
*SPH SURFACE BEHAVIOR	Define boundary surface interaction properties between SPH particles and Lagrangian surfaces.	Interaction module	Abaqus/Explicit
*SPRING	Define spring behavior.	Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, model connectors in the Interaction module.	Abaqus/Standard Abaqus/Explicit
*SRADIATE	Specify surface radiation conditions in heat transfer analysis.	Interaction module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*STATIC	Static stress/displacement analysis.	Step module	Abaqus/Standard
*STEADY STATE CRITERIA	Specify steady-state criteria for terminating a quasi-static uni-directional simulation.	Unsupported	Abaqus/Explicit
*STEADY STATE DETECTION	Specify steady-state requirements for terminating a quasi-static uni-directional simulation.	Unsupported	Abaqus/Explicit
*STEADY STATE DYNAMICS	Steady-state dynamic response based on harmonic excitation.	Step module	Abaqus/Standard
*STEADY STATE TRANSPORT	Steady-state transport analysis.	Unsupported	Abaqus/Standard
*STEP	Begin a step.	Step module	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*SUBCYCLING	Define a subcycling zone.	Unsupported	Abaqus/Explicit
*SUBMODEL	Specify driven boundary nodes in submodeling analysis.	Load module and model attribute	Abaqus/Standard Abaqus/Explicit
*SUBSTRUCTURE COPY	Copy a substructure definition.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE DAMPING	Specify mass proportional and stiffness proportional damping for a substructure.	Unsupported	Abaqus/Standard Abaqus/AMS
*SUBSTRUCTURE DAMPING CONTROLS	Specify damping controls for a substructure property.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE DELETE	Remove a substructure from the substructure library.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE DIRECTORY	List information about the substructures on a substructure library.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE GENERATE	Substructure generation analysis.	Step module	Abaqus/Standard
*SUBSTRUCTURE LOAD CASE	Begin the definition of a substructure load case.	Load module	Abaqus/Standard
*SUBSTRUCTURE MATRIX OUTPUT	Write a substructure's recovery matrix, reduced stiffness matrix, mass matrix, load case vectors, and gravity load vectors to a file.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE MODAL DAMPING	Specify damping for a substructure property.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE PATH	Enter into a substructure to obtain output or return back from a previously entered substructure.	Unsupported	Abaqus/Standard
*SUBSTRUCTURE PROPERTY	Translate, rotate, and/or reflect substructures.	Assembly module	Abaqus/Standard
*SURFACE	Define a surface or region in a model.	Element-based surfaces are supported by the Surface toolset. Node-based surfaces are not supported; if node-based surfaces are imported into Abaqus/CAE, they are treated as sets.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*SURFACE BEHAVIOR	Define alternative pressure-overclosure relationships for contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
*SURFACE FLAW	Define geometry of surface flaws.	Unsupported	Abaqus/Standard
*SURFACE INTERACTION	Define surface interaction properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
*SURFACE OUTPUT	Specify surface variables to be written to the output database.	Unsupported	Abaqus/CFD
*SURFACE PROPERTY	Define surface properties for cavity radiation.	Interaction module	Abaqus/Standard
*SURFACE PROPERTY ASSIGNMENT	Assign surface properties to a surface for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
*SURFACE SECTION	Specify section properties for surface elements.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/Aqua
*SURFACE SMOOTHING	Define surface smoothing methods.	Interaction module	Abaqus/Standard
*SWELLING	Specify time-dependent volumetric swelling.	Property module	Abaqus/Standard
*SYMMETRIC MODEL GENERATION	Create a three-dimensional model from an axisymmetric or partial three-dimensional model.	Unsupported	Abaqus/Standard
*SYMMETRIC RESULTS TRANSFER	Import results from an axisymmetric or partial three-dimensional analysis.	Unsupported	Abaqus/Standard
*SYSTEM	Specify a local coordinate system in which to define nodes.	Not applicable; instancing a part in the Assembly module creates a local coordinate system.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*TEMPERATURE	Specify temperature as a predefined field.	Load module	Abaqus/Standard Abaqus/Explicit
*TENSILE FAILURE	Specify a tensile failure model and criterion.	Unsupported	Abaqus/Explicit
*TENSION CUTOFF	Specify tension cutoff data for the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
*TENSION STIFFENING	Define the retained tensile stress normal to a crack in a *CONCRETE model.	Property module	Abaqus/Standard
*THERMAL EXPANSION	Define the thermal expansion behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
*TIE	Define surface-based tie and cyclic symmetry constraints or coupled acoustic-structural interactions.	Interaction module	Abaqus/Standard Abaqus/Explicit
*TIME POINTS	Specify time points at which data are written to the output database file, or specify time points in the loading history at which the response of a structure will be evaluated in a direct cyclic analysis.	Step module	Abaqus/Standard Abaqus/Explicit
*TORQUE	Define the torsional behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
*TORQUE PRINT	Print a summary of the total torque that can be transmitted across axisymmetric slide lines.	Unsupported	Abaqus/Standard
*TRACER PARTICLE	Define tracer particles for tracking the location of and results at material points during a step.	Unsupported	Abaqus/Explicit
*TRANSFORM	Specify a local coordinate system at nodes.	Define nodal coordinate systems for prescribed conditions in the Load module.	Abaqus/Standard Abaqus/Explicit Abaqus/CFD
*TRANSPORT EQUATION SOLVER	Specify the linear solver and parameters for solving the transport equations in an Abaqus/CFD analysis.	Step module	Abaqus/CFD
*TRANSPORT VELOCITY	Specify angular transport velocity.	Unsupported	Abaqus/Standard
*TRANSVERSE SHEAR STIFFNESS	Define transverse shear stiffness for beams and shells.	Property module	Abaqus/Standard Abaqus/Explicit
*TRIAXIAL TEST DATA	Provide triaxial test data.	Property module	Abaqus/Standard Abaqus/Explicit
*TRS	Used to define temperature-time shift for time history viscoelastic analysis.	Property module	Abaqus/Standard Abaqus/Explicit
*TURBULENCE MODEL	Specify turbulence models for fluid analyses.	Step module	Abaqus/CFD
*UEL PROPERTY	Define property values to be used with a user element type.	Actuator/sensor interaction properties can be defined in the Interaction module.	Abaqus/Standard Abaqus/Explicit
*UNDEX CHARGE PROPERTY	Define an UNDEX charge for incident waves.	Interaction module	Abaqus/Standard Abaqus/Explicit
*UNIAXIAL	Characterize fabric materials through loading and unloading test data.	Unsupported	Abaqus/Explicit
*UNIAXIAL TEST DATA	Used to provide uniaxial test data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
*UNLOADING DATA	Provide unloading data for uniaxial behavior models in connectors or unloading data from uniaxial and shear tests for fabrics.	Unsupported	Abaqus/Explicit
*USER DEFINED FIELD	Redefine field variables at a material point.	Property module	Abaqus/Standard Abaqus/Explicit
*USER ELEMENT	Introduce a user-defined element type.	Actuator/sensor interactions can be defined in the Interaction module.	Abaqus/Standard Abaqus/Explicit
*USER MATERIAL	Define material constants for use in subroutine `UMAT`, `UMATHT`, or `VUMAT`.	Property module	Abaqus/Standard Abaqus/Explicit
*USER OUTPUT VARIABLES	Specify number of user variables.	Property module	Abaqus/Standard
*VARIABLE MASS SCALING	Specify mass scaling during the step.	Step module	Abaqus/Explicit
*VIEW FACTOR OUTPUT	Write radiation view factors to the results file in cavity radiation heat transfer analysis.	Unsupported	Abaqus/Standard
*VISCO	Transient, static, stress/displacement analysis with time-dependent material response (creep, swelling, and viscoelasticity).	Step module	Abaqus/Standard
*VISCOELASTIC	Specify dissipative behavior for use with elasticity.	Property module	Abaqus/Standard Abaqus/Explicit
*VISCOSITY	Specify material shear viscosity.	Property module	Abaqus/Explicit Abaqus/CFD
*VISCOUS	Specify viscous material properties for the two-layer viscoplastic model.	Property module	Abaqus/Standard
*VOID NUCLEATION	Define the nucleation of voids in a porous material.	Property module	Abaqus/Standard Abaqus/Explicit
*VOLUMETRIC TEST DATA	Provide volumetric test data.	Property module	Abaqus/Standard Abaqus/Explicit
*WAVE	Define gravity waves for use in immersed structure calculations.	Unsupported	Abaqus/Aqua
*WIND	Define wind velocity profile for wind loading.	Unsupported	Abaqus/Aqua