*SIMPLE SHEAR TEST DATA
Used to provide simple shear test data.

This option is used to provide simple shear test data. It can be used only in conjunction with the *HYPERFOAM option.

Products: Abaqus/Standard  Abaqus/Explicit  Abaqus/CAE  

Type: Model data

Level: Model  

Abaqus/CAE: Property module

References:
There are no parameters associated with this option.

Data lines to specify simple shear test data for a hyperfoam: 

First line:

  1. Nominal shear stress, .

  2. Nominal shear strain, .

  3. Nominal transverse stress, (normal to edge with shear stress). This stress value is optional but strongly recommended. If given, a more accurate material response will be obtained.

Repeat this data line as often as necessary to give the stress-strain data.