This option is used to write cavity radiation variables to the output database. It must be used in conjunction with the *OUTPUT option.
Products: Abaqus/Standard Abaqus/CAE
Type: History data
Level: Step
Abaqus/CAE: Step module
Set this parameter equal to the name of the cavity for which this output request is being made.
Set this parameter equal to the name of the element set for which this output request is being made.
Set this parameter equal to the name of the surface for which this output request is being made.
Set VARIABLE=ALL to indicate that all cavity radiation variables applicable to this procedure and material type should be written to the output database.
If this parameter is omitted, the cavity radiation variables requested for output must be specified on the data lines.
First line:
Specify the identifying keys for the variables to be written to the output database. The keys are defined in “Abaqus/Standard output variable identifiers,” Section 4.2.1 of the Abaqus Analysis User's Guide.
Repeat this data line as often as necessary to define the cavity radiation variables to be written to the output database.