This option is used to choose the nodal variables that will be written to the results (.fil) file in an Abaqus/Standard analysis or to the selected results (.sel) file in an Abaqus/Explicit analysis. In an Abaqus/Explicit analysis it must be used in conjunction with the *FILE OUTPUT option.
Products: Abaqus/Standard Abaqus/Explicit Abaqus/CAE
Type: History data
Level: Step
Abaqus/CAE:
This parameter applies only to Abaqus/Standard analyses.
Set this parameter equal to the output frequency, in increments. The output will always be written to the results file at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.
This parameter applies only to Abaqus/Standard analyses.
This parameter is relevant only at nodes where the *TRANSFORM option has been used to define a local coordinate system.
Set GLOBAL=NO to write vector-valued nodal variables in the local directions.
Set GLOBAL=YES (default) to write vector-valued nodal variables in the global directions. This default is the opposite of the default on the *NODE PRINT option and is used because most postprocessors assume that components are given in the global system.
This parameter applies only to Abaqus/Standard analyses.
This parameter is useful only during eigenvalue extraction for natural frequencies (“Natural frequency extraction,” Section 6.3.5 of the Abaqus Analysis User's Guide) and for eigenvalue buckling estimation (“Eigenvalue buckling prediction,” Section 6.2.3 of the Abaqus Analysis User's Guide).
Set this parameter equal to the highest mode number for which output is required.
The default value is LAST MODE=N, where N is the number of modes extracted. If the MODE parameter is used, the default value is LAST MODE=M, where M is the value of the MODE parameter.
This parameter applies only to Abaqus/Standard analyses.
This parameter is useful only during eigenvalue extraction for natural frequencies and for eigenvalue buckling estimation. Set this parameter equal to the first mode number for which output is required. The default is MODE=1. See also the LAST MODE parameter. When performing a *FREQUENCY analysis, the normalization will follow the format set by the NORMALIZATION parameter. Otherwise, the normalization is such that the largest displacement component in the mode has a magnitude of 1.0.
Set this parameter equal to the name of the node set for which the output is being written to the results file. If this parameter is omitted, the output will be written for all nodes in the model.
First line:
Give the identifying keys for the variables to be written to the results or selected results file. The keys are defined in the “Nodal variables” section of “Abaqus/Standard output variable identifiers,” Section 4.2.1 of the Abaqus Analysis User's Guide, and “Abaqus/Explicit output variable identifiers,” Section 4.2.2 of the Abaqus Analysis User's Guide.
Repeat this data line as often as necessary to define the nodal variables to be written to the results or selected results file.