This option is used during mode-based dynamic procedures to control the printed output of generalized coordinate (modal amplitude and phase) values.
Product: Abaqus/Standard
Type: History data
Level: Step
Set this parameter equal to the output frequency, in increments. The output will always be printed at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.
First line:
Give the identifying keys for the variables to be printed. The keys are defined in the “Modal variables” section of “Abaqus/Standard output variable identifiers,” Section 4.2.1 of the Abaqus Analysis User's Guide.
Repeat this data line as often as necessary: each line defines a table.