*MODAL OUTPUT
Write generalized coordinate (modal amplitude) data to the output database during a mode-based dynamic or complex eigenvalue extraction procedure.

This option is used during a mode-based dynamic or complex eigenvalue extraction procedure to write generalized coordinate (modal amplitude and phase) values to the Abaqus/Standard output database. It must be used in conjunction with the *OUTPUT, HISTORY option.

Products: Abaqus/Standard  Abaqus/CAE  

Type: History data

Level: Step

Abaqus/CAE: Step module

References:

Optional parameter:

VARIABLE

Set VARIABLE=ALL to indicate that all modal variables applicable to this procedure and material type should be written to the output database.

If this parameter is omitted, the modal variables requested for output must be specified on the data lines.

Data lines to request modal output: 

First line:

  1. Give the identifying keys for the variables to be written to the output database. The keys are defined in the “Modal variables” section of Abaqus/Standard output variable identifiers, Section 4.2.1 of the Abaqus Analysis User's Guide.

Repeat this data line as often as necessary to define the modal variables to be written to the output database.