*GLOBAL DAMPING
Specify global damping.

This option is used to provide global damping factors for the following procedures in Abaqus/Standard:

Products: Abaqus/Standard  Abaqus/CAE  

Type: History data

Level: Step

Abaqus/CAE: Supported in the Step module only for substructure generation.

References:

Optional parameters:

ALPHA

Set this parameter equal to the factor to create global Rayleigh mass proportional damping , where denotes the model mass matrix. The default is ALPHA=0. (Units of T–1.)

BETA

Set this parameter equal to the factor to create global Rayleigh stiffness proportional damping , where denotes the model stiffness matrix. The default is BETA=0. (Units of T.)

FIELD

Set FIELD=ACOUSTIC to apply the global damping only to the acoustic fields in the model.

Set FIELD=ALL (default) to apply the global damping to all of the valid displacement, rotation, and acoustic fields in the model.

Set FIELD=MECHANICAL to apply the global damping only to the valid displacement and rotation fields in the model.

This parameter is not supported in a mode-based steady-state dynamic analysis that uses coupled acoustic-structural modes.

STRUCTURAL

Set this parameter equal to the factor to create frequency-independent stiffness proportional structural damping , where denotes the model stiffness matrix. The default is STRUCTURAL=0.

There are no data lines associated with this option.