*DETONATION POINT
Define detonation points for a JWL explosive equation of state.

This option is used to define detonation points for a JWL explosive equation of state. It is required when the *EOS, TYPE=JWL option is used. The *DETONATION POINT option should appear immediately after the *EOS option.

Products: Abaqus/Standard  Abaqus/Explicit  Abaqus/CAE  

Type: Model data

Level: Model  

Abaqus/CAE: Property module

References:
There are no parameters associated with this option.

Data lines to define detonation points: 

First line:

  1. Coordinate 1 of detonation point.

  2. Coordinate 2 of detonation point.

  3. Coordinate 3 of detonation point.

  4. Detonation delay time (total time, as defined in Conventions, Section 1.2.2 of the Abaqus Analysis User's Guide). The default is 0.

Repeat this data line as often as necessary to define each detonation point.