This option is used to identify the regions across which data will be exchanged and to specify the fields to be passed across those regions. It must be used in conjunction with the *CO-SIMULATION option to identify the analysis program for co-simulation with Abaqus.
Products: Abaqus/Standard Abaqus/Explicit Abaqus/CFD Abaqus/CAE
Type: History data
Level: Step
Abaqus/CAE: Interaction module
When TYPE=NODE, SURFACE, or VOLUME, include this parameter to specify fields and the accompanying region for export to the coupled analysis.
When TYPE=DISCRETE, include this parameter to specify sensor variables for export.
When TYPE=NODE, SURFACE, or VOLUME, include this parameter to specify fields and the accompanying region for import from the coupled analysis.
When TYPE=DISCRETE, include this parameter to specify actuator variables for import.
Set TYPE=NODE to define a co-simulation region consisting of nodes only.
Set TYPE=SURFACE (default) to define a co-simulation surface region.
Set TYPE=VOLUME to define a co-simulation volume region.
Set TYPE=DISCRETE to define coupling through sensors and actuators.
First line:
The name of the node set.
Field identifier for the field to be passed across this surface. The field identifiers are defined in “Preparing an Abaqus analysis for co-simulation,” Section 17.2.1 of the Abaqus Analysis User's Guide.
Etc., up to seven field identifiers.
Repeat this data line as often as necessary to define more than seven field identifiers for a given region. Repeat the option to define import and/or export fields. When PROGRAM=MULTIPHYSICS, only a single node set can be declared for the co-simulation.
First line:
The name of the element-based or node-based surface.
Field identifier for the field to be passed across this surface. The field identifiers are defined in “Preparing an Abaqus analysis for co-simulation,” Section 17.2.1 of the Abaqus Analysis User's Guide.
Etc., up to seven field identifiers.
Repeat this data line as often as necessary to define more than seven field identifiers for a given region. Repeat the option to define import and/or export fields. When PROGRAM=MULTIPHYSICS, only a single surface can be declared for the co-simulation.
First line:
The name of the element set.
Field identifier for the field to be passed across this surface. The field identifiers are defined in “Preparing an Abaqus analysis for co-simulation,” Section 17.2.1 of the Abaqus Analysis User's Guide.
Etc., up to seven field identifiers.
Repeat this data line as often as necessary to define more than seven field identifiers for a given region. Repeat the option to define import and/or export fields. When PROGRAM=MULTIPHYSICS, only a single element set can be declared for the co-simulation.
First line:
The name of the first sensor or actuator.
The name of the second sensor or actuator.
Etc., up to seven sensor or actuator identifiers.
Repeat this data line as often as necessary to define more than seven sensor or actuator definitions. The data line can refer either to names of sensors only or to names of actuators only, according to the IMPORT or EXPORT parameter setting.
Set TYPE=SURFACE (default) to define a surface-based co-simulation region.
Set TYPE=NODE to define a co-simulation region using a node set.