*CONCRETE TENSION DAMAGE
Define postcracking damage properties for the concrete damaged plasticity model.

This option is used to define postcracking damage (or stiffness degradation) properties for the concrete damaged plasticity material model. The *CONCRETE TENSION DAMAGE option must be used in conjunction with the *CONCRETE DAMAGED PLASTICITY, *CONCRETE TENSION STIFFENING, and *CONCRETE COMPRESSION HARDENING options. In addition, the *CONCRETE COMPRESSION DAMAGE option can be used to specify compressive stiffness degradation damage.

Products: Abaqus/Standard  Abaqus/Explicit  Abaqus/CAE  

Type: Model data

Level: Model  

Abaqus/CAE: Property module

References:

Optional parameters:

COMPRESSION RECOVERY

This parameter is used to define the stiffness recovery factor, , which determines the amount of compression stiffness that is recovered as the loading changes from tension to compression. If , the material fully recovers the compressive stiffness; if , there is no stiffness recovery. Intermediate values of result in partial recovery of the compressive stiffness. The default value is , which corresponds to the assumption that as cracks close the compressive stiffness is unaffected by tensile damage.

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the tension damage, in addition to temperature. If this parameter is omitted, it is assumed that the tension damage behavior depends only on temperature. See Specifying field variable dependence” in “Material data definition, Section 21.1.2 of the Abaqus Analysis User's Guide, for more information.

TYPE

Set TYPE=STRAIN (default) to specify the tensile damage variable as a function of cracking strain.

Set TYPE=DISPLACEMENT to specify the tensile damage variable as a function of cracking displacement.

Data lines if the tensile damage is specified as a function of cracking strain (TYPE=STRAIN): 

First line:

  1. Tensile damage variable, .

  2. Direct cracking strain, .

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

The first point at each value of temperature must have a cracking strain of 0.0 and a tensile damage value of 0.0.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):

  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the tensile damage behavior on cracking strain, temperature, and other predefined field variables.

Data lines if the tensile damage is specified as a function of cracking displacement (TYPE=DISPLACEMENT): 

First line:

  1. Tensile damage variable, .

  2. Direct cracking displacement, . (Units of L.)

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

The first point at each value of temperature must have a cracking displacement of 0.0 and a tensile damage value of 0.0.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):

  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the tensile damage behavior on cracking displacement, temperature, and other predefined field variables.