This option is used to apply concentrated current to any node of a model in coupled thermal-electrical and coupled thermal-electrical-structural analyses.
Products: Abaqus/Standard Abaqus/CAE
Type: History data
Level: Step
Abaqus/CAE: Load module
Set this parameter equal to the name of the amplitude curve that defines the magnitude of the current during the step (“Amplitude curves,” Section 34.1.2 of the Abaqus Analysis User's Guide). If this parameter is omitted, the reference magnitude is applied immediately at the beginning of the step or linearly over the step, depending on the value assigned to the AMPLITUDE parameter on the *STEP option (“Defining an analysis,” Section 6.1.2 of the Abaqus Analysis User's Guide).
Set OP=MOD (default) for existing *CECURRENTs to remain, with this option modifying existing concentrated currents or defining additional concentrated currents.
Set OP=NEW if all existing *CECURRENTs applied to the model should be removed.
First line:
Node number or node set label.
Leave blank.
Reference magnitude for current. (Units of CT–1.)
Repeat this data line as often as necessary to define current at various nodes or node sets.