The AccelerationBCState object stores the propagating data of an acceleration boundary condition in a step. One instance of this object is created internally by the AccelerationBC object for each step. The instance is also deleted internally by the AccelerationBC object.
The AccelerationBCState object has no constructor or methods.
The AccelerationBCState object is derived from the BoundaryConditionState object.
import load mdb.models[name].steps[name].boundaryConditionStates[name]
The AccelerationBCState object has the following members:
A Float specifying the acceleration component in the 1-direction.
A Float specifying the acceleration component in the 2-direction.
A Float specifying the acceleration component in the 3-direction.
A Float specifying the rotational acceleration component about the 1-direction.
A Float specifying the rotational acceleration component about the 2-direction.
A Float specifying the rotational acceleration component about the 3-direction.
A SymbolicConstant specifying the propagation state of the acceleration component in the 1-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the acceleration component in the 2-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the acceleration component in the 3-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the rotational acceleration component about the 1-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the rotational acceleration component about the 2-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the rotational acceleration component about the 3-direction. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the amplitude reference. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the BoundaryConditionState object. Possible values are:
NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
PROPAGATED_FROM_BASE_STATE
MODIFIED_FROM_BASE_STATE
DEACTIVATED_FROM_BASE_STATE
BUILT_INTO_MODES
A String specifying the name of the amplitude reference. The String is empty if the boundary condition has no amplitude reference.
| *BOUNDARY, TYPE=ACCELERATION (degree of freedom: 1, 2, 3, 4, 5, or 6) |